sewing room update & a new machine!

I’d always dreamed of having a design wall and a counter-height cutting table in the future sewing room of my dreams because I couldn’t figure out how to add them to my current space. After brainstorming for a bit, I came up with a plan that would give me space for a design wall, fabric storage, and a counter sewing and cutting/pressing. In true Rebekah fashion, as Jon says, I came up with this plan on a Thursday and had it all in place and reorganized by Saturday night. Never resting until being fully content is a bit of a problem for me, but it does manifest itself in productivity and finished projects! 

I've had a couple weeks to sew and use my new space and I couldn't be happier with the setup. I was even able to fit an extra temporary table in here so my neighbor, Christina, and I could sew together.

Here’s a few older tours of my room (2010, 2014). I’ve had the same furniture in place for 8 years, but have added craft supplies and moved things around a bit every so often. This time, I moved out my beloved 4x4 Expedit shelf and my long work table in favor of a more flexible layout. This room is small, at about 9 feet by 12 feet, and it’s made even smaller because the door is diagonal and cuts out a bit of space on two walls.

To the left of the door, I placed my new design wall, following Elizabeth Hartman’s design wall tutorial. I ran into a few roadblocks with this. Because I thought my room was 9 feet wide, I assumed that two four feet panels would fit side by side. Unfortunately, the diagonal door chopped off the width a bit so I had to cut off one foot of width from one of the panels. Then, because the two twin batting pieces that I had were only 90” long, I didn’t have enough length of batting to wrap around the full height of the foam, so I cut off a foot from each panel. Now I have two panels that, when stood next to each other, are 7 feet wide and 7 feet high. It's been so nice to have a dog and cat free area to place blocks while the layout and design percolates.

On the next wall, I added another thin Billy shelf and moved all of my fabric and a majority of books to this spot. I pulled the mini green dresser out of my closet to place under the window. It holds office supplies and cross stitch supplies. 

Next up is my glorious new cutting station. Jon and I built this after seeing a few tutorials on IKEA hackers. I used 6” Capita legs for the base (8 in total), then two pieces of hard oak plywood that’s ¾” thick. In between the plywood, there’s three 2x2 Kallax units. Because the Kallax units are updated, thinner versions of the old Expedit shelves, the width of one unit is not the same as the depth of two units put together, so there’s a 1.5” gap on one side of the end shelf. It doesn’t bother me enough to do something about it, but it is a bit annoying. I used a base of 41”x46.5” and a top of 36”x48”, which fits everything well. On top of table, I’m storing my cutting mat and a pressing board that I made following this tutorial. The wall holds my collection of minis from previous doll quilt swaps, guild swaps, and mug rug swaps.

 

I organized my closet and got rid of some older tools, supplies and magazines that I no longer plan on using. I added a Gorm shelf to hold the rest and added a few more of these Trofast bins (suggested by Rossie) for holding works in progress. The large metal bin in there holds lots of mini projects and embroidery kits that are all cut out and ready to go. Hopefully these will be finished by the end of the year.

The final wall holds my favorite tools. The old IKEA table I was using was made from separate legs and a base and wasn’t the sturdiest of tables. This table is a little deeper to hold my new sewing machine and does not vibrate at all while I’m sewing. On the new pegboard, I now have a spot for all of my templates and tools. I love sewing gadgets and I love seeing things hung up in front of me to remind me of what I do own, so this is perfect for that.

And speaking of new machines, I bought this Janome Memory Craft 8900 right after Quiltcon at a fantastically low show special from SewVacDirect. I’ve had it for over a month and have already made one quilt from start to finish and four new tops on it. I couldn’t be happier with my choice and feel like I’ve barely scratched the surface of what this can do. I was not expecting to come home with a new machine right after Quiltcon, but I sewed on it for a bit during the last hour of Quiltcon and couldn’t let it go.